Custom Logging in SQL Server Integration Services

By:   |   Updated: 2008-01-22   |   Comments (38)   |   Related: 1 | 2 | More > Integration Services Error Handling


Problem

We have quite a few SSIS packages that we run on a regular basis to extract data from our OLTP systems and transform/load into our data warehouse. We would like to capture some basic information about these SSIS packages such as what packages were run, when, how long did they take to run, and how many rows were extracted and loaded. We have looked in to the built-in logging that comes with SSIS but we just don't see a straight forward way to get row counts. Are we missing something?

Solution

SSIS provides a flexible logging mechanism that is tightly integrated with the various events raised during package execution. However, the issue that you raise is accurate and the best approach is to use the built-in SSIS logging where appropriate and augment it with your own custom logging. A simple, straight-forward custom logging schema can provide the information you need. Let's take a look at a sample schema that can be used to capture the basic logging information that you have requested:

Sample SSIS Logging Data Model

Sample SSIS Logging Data Model

Main points about the above schema:

  • All of the tables are in the etl schema; it's a good idea to isolate these kinds of tables from other tables in your database.
  • A row is inserted into the PackageLog table by every SSIS package that executes.
  • A row is inserted into the ExtractLog when an SSIS package extracts rows from a table in the OLTP database.
  • A row is inserted into the LoadLog table when an SSIS package inserts, updates or deletes rows in a dimension or fact table in the data warehouse.
  • The EndTime and Success columns are updated if the package runs to completion.
  • The above schema does not provide for error logging which is probably best handled using the built-in SSIS logging capabilities.

The pattern for populating the logging tables is to implement an "Init" and an "End" stored procedure for each table. The stored procedures are executed in the SSIS package using the Execute SQL task. The PackageLog stored procedures are as follows:

  • stp_InitPackageLog is called at the beginning of the SSIS package to insert a row into the PackageLog table with the Start Time and Package Name; it returns the PackageLogID (identity value). The PackageLogID is saved in a package variable to update the row when the package is done.
  • stp_EndPackageLog is called at the end of the SSIS package to update the row inserted in the PackageLog with the EndTime and set the Success column to 1.

Packages that extract data from a table in an OLTP system will update the ExtractLog table as follows:

  • stp_InitExtractLog is called to insert a row into the ExtractLog table with the Start Time and OLTP Table Name that is being processed and return the ExtractLogID (identity value). The ExtractLogID is saved in a package variable to update the row when the extract is done. In addition the stored procedure returns the maximum LastExtractDateTime for the table; this value is stored in a package variable and used in the Data Flow to only get the rows that have changed since the last extract.
  • stp_EndExtractLog is called when the extract is complete to update the ExtractCount (number of rows extracted), EndTime, LastExtractDateTime, and Success columns. The LastExtractDateTime column is a DATETIME type that is set to the maximum last update date/time extracted from the OLTP table. The OLTP table needs to provide a reliable last update date/time column in order to make this work. For example, tables in the AdventureWorks database have a ModifiedDate column that reflects the last date and time the row was updated.

Packages that update dimension or fact tables in the data warehouse will update the LoadLog table using the same pattern; i.e. stp_InitLoadLog and stp_EndLoadLog. The LoadLog table records the number of rows that were inserted, updated or deleted for a given dimension or fact table in the warehouse.

Now let's take a look at a simple SSIS package that implements the custom logging. We'll use the AdventureWorks sample database as our OLTP source, extract rows from the Sales.Customer table, and save the rows in a staging table. The following is the Control Flow for the package:

SSIS Control Flow

SSIS Control Flow

Next let's drill in to the Data Flow:

SSIS Data Flow

SSIS Data Flow

The Get Updated Customers task selects the rows from the Sales.Customer table where the ModifiedDate is greater than the maximum ModifiedDate the last time the package was run. The maximum ModifiedDate is stored in the LastExtractDateTime column in the ExtractLog table and returned in the call to the stp_InitExtractLog stored procedure (Init Extract Log task in the Control Flow). The Get Extract Row Count task simply assigns the number of rows passing through to a package variable; the row count is passed as a parameter to the stp_EndExtractLog stored procedure (End Extract Log task in Control Flow) and stored in the ExtractLog table.

Next Steps
  • Download the sample SSIS package and database scripts here and try it out to see how you might craft your own custom logging. Note that the sample uses the AdventureWorks sample database and another database called MSSQLTIPS; both must be available in the default SQL Server instance or you can edit the Connection Managers in the SSIS package as appropriate.
  • The sample described in this tip is just a starting point; in your particular circumstances you may find additional information that should be logged.
  • The custom logging that you implement will likely provide future benefits as well; for instance in a major upgrade to an existing ETL process the information in the custom logging tables can be used to compare results between the currently deployed ETL process and your development environment.
  • Custom logging is just one of a number of things that should be defined early in your development effort and made part of an SSIS package "template" that you use as the starting point for each new package.


sql server categories

sql server webinars

subscribe to mssqltips

sql server tutorials

sql server white papers

next tip



About the author
MSSQLTips author Ray Barley Ray Barley is a Principal Architect at IT Resource Partners and a MSSQLTips.com BI Expert.

This author pledges the content of this article is based on professional experience and not AI generated.

View all my tips


Article Last Updated: 2008-01-22

Comments For This Article




Wednesday, April 28, 2021 - 10:36:12 AM - Raymond Barley Back To Top (88620)
Regarding the question below: Wednesday, April 28, 2021 - 2:13:54 AM - Shammah

The tip assumes that you have inserted rows that have changed in the source into a SQL Server table; e.g. a staging table. The simple approach to getting the count of rows inserted, updated and deleted is just to assign @@ROWCOUNT to a variable; e.g. DECLARE @ADDED INT, @UPDATED INT, @DELETED INT. After you execute a T-SQL command to INSERT, UPDATE or DELETE, you immediately assign @@ROWCOUNT accordingly; e.g. after an INSERT, SET @ADDED = @@ROWCOUNT

Wednesday, April 28, 2021 - 2:13:54 AM - Shammah Back To Top (88618)
Hi. Thanks for this very helpful article. I've been able to customize the script to fit my requirements which took a while, but it finally worked.

The stored procedure for the LoadLog table wasn't provided. Does anyone have an idea about how to go about writing that? Especially with regard to getting the the counts for inserts and deletes.

Thanks in advance.

Friday, April 5, 2019 - 9:52:23 AM - Raymond Barley Back To Top (79480)

Question: If I have two data flows running parallel and I am using extract logs for two tables, not able to capture extracted counts and end dates properly.

From the standpoint of the design pattern in this tip, you should only have 1 data flow in your package. Each data flow goes in its own package.

However, if you must you can have 2 Extract data flows in a package and set the End Package Log task to have a precedence constraint that it only runs after both data flows have completed.

Friday, April 5, 2019 - 12:04:55 AM - Shruthi Yadav Back To Top (79474)

If I have two data flows running parallel and I am using extract logs for two tables, not able to capture extracted counts and end dates properly. 

Monday, February 19, 2018 - 2:49:08 AM - Anakardian Back To Top (75239)

While the basic idea is good and works nicely, it only works if you handle everything sequentially.

If the control and data flows are not handled one at a time, the entire process fails as the same variable is used every time.

For parallel processing you need to have a complete set of variables for each control and data flow.

Monday, November 9, 2015 - 8:34:09 AM - Div Back To Top (39043)

Thank you but in entire dataflow there are many opration taking places so i was curious if I should end it right after extracting data from source. I noticed the SP was getdate(). Thank you for the reply.

Friday, November 6, 2015 - 4:18:39 PM - Ray Barley Back To Top (39037)

The question below asked where does the Extraction End time get set.

The End Extract Log task executes the SQL Server stored procedure [etl].[stp_EndExtractLog] which uses the GETDATE() function to set the EndTime column in the etl.ExtractLog table.

Monday, October 26, 2015 - 4:09:57 PM - Div Back To Top (38966)

I am trying to impliment this but i am not sure at what point you  catch the Extraction End time ? right after you read from source and have row count ? 

Wednesday, March 20, 2013 - 2:48:16 PM - Raymond Barley Back To Top (22916)

SSIS has event handlers that you can use; in particular there is an OnError event that you should try.  Look for the Event Handlers tab on the SSIS designer.

Wednesday, March 20, 2013 - 1:08:49 PM - Rahul Back To Top (22912)

Hi,

Is there any way to capture the exceptions which may occur while execution of SSIS packages.

I am talking about exceptions while execution of data flow tasks.

 

Many thanks,

Rahul

Tuesday, May 29, 2012 - 2:05:12 PM - Raymond Barley Back To Top (17704)

Take a look at the Extract sequence container in the tip.  The Init Extract Log Execute SQL Task executes a stored procedure that inserts a row into the ExtractLog table.  The Extract Customers Data Flow uses a Row Count transform to populate a package variable with the number of rows read.  The End Extract Log Execute SQL Task calls a stored procedure to update the row in the ExtractLog  table that was inserted by the Init Extract Log Execute SQL Task with the number of rows read, end time, etc.

To do the same thing for dimensions and facts follow this exact pattern. 

Tuesday, May 29, 2012 - 1:04:07 AM - Ying Back To Top (17687)

Greetings Ray,

Thank you for your article. i was looking for the stp_InitLoadLog and stp_EndLoadLog in the .zip file , is it posted on a different article?

likes Jackie says i too need some direction on loading a datawarehouse, i need to log the process like dim's loaded with row counts and then the Fact's with the row counts can you give me some direction on how please. how can i implement the process what is the best practice . like you said

"stp_InitLoadLog and stp_EndLoadLog would look almost identical to stp_InitExtractLog and stp_EndExtractLog"

can you throw some light on this pls

Monday, May 28, 2012 - 6:25:58 PM - Jampa Back To Top (17684)

Hi Ray,

Thank you very much for the excellent example, i have gone thru your package and the process multiple times and was able to replicate in my scenario. 

 

Thanks a lot!!!

Monday, May 7, 2012 - 1:52:25 PM - Raymond Barley Back To Top (17313)

The package only dealt with extracting data into staging.  To do custom logging for loading dimension or fact tables, stp_InitLoadLog and stp_EndLoadLog would look almost identical to stp_InitExtractLog and stp_EndExtractLog; the execute SQL tasks would also be just about the same as they are in the package in this tip.

Monday, May 7, 2012 - 10:48:52 AM - Jackie Back To Top (17303)

I just read this article today and I was able to get everything to work except the LoadLog - where is the store procedure logic for

stp_InitLoadLog and stp_EndLoadLog  - it was not in the zip file above?  Can I use LoadLog for my load into staging and into dimensions and fact tables?  If so can you show me how?

Sunday, April 15, 2012 - 7:51:44 AM - Ray Barley Back To Top (16924)

Hard-coding the schema name and table name is usually okay unless they are going to change.  If they will change then you may be able to put them in a table that you read or possibly supply them a parameters when you run the package.  Either way if the schema and table name are variable, then your SQL statements will need to by dynamic.

Saturday, April 14, 2012 - 11:43:44 AM - krk Back To Top (16916)

I just need to add a paramater and modify the stored procedure & table to include the schema column.

I can't think of an alternative way other than hard code the table & schema.

I appreciate your replies.

Thanks.

 

Saturday, April 14, 2012 - 9:28:51 AM - Raymond Barley Back To Top (16915)

Add a SchemaName column to the ExtractLog and LoadLog tables.  Add a SchemaName parameter to the stp_InitExtractLog and stp_InitLoadLog stored procedures; add the SchemaName column to the INSERT statements.

Saturday, April 14, 2012 - 8:25:31 AM - krk Back To Top (16914)

Ray,

I have 69 tables in each of two schemas (138 Tables). The tables are the same in each schema.

Do you know how I could modifiy the Package to include the Schema Name?

Thanks again.

 

Friday, April 13, 2012 - 4:55:30 PM - Ray Barley Back To Top (16909)

I did not but if you search the MSSQLTips site for SSIS Error Log" you will get a number of tips.  Click the Tips tab to get to the tips.

Friday, April 13, 2012 - 3:44:00 PM - KRK Back To Top (16907)

Ray,

I created the destination table with a SELECT INTO WHERE 1 = 2.

There were NOT NULL Constraints, I removed them and it worked.

Thanks for being patient with me?

Did you write an article on Package Error Loging?

 

Friday, April 13, 2012 - 2:34:02 PM - KRK Back To Top (16906)

The OLE DB SOurce and Destination task faile and I'm getting the following errors:

[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
 The PrimeOutput method on component "Get Updated Customers" (1) returned error code 0xC02020C4.
 The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.

[Put Updated Customers in Staging [56]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "input "OLE DB Destination Input" (69)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (69)" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.

[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Put Updated Customers in Staging" (56) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (69). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure.

[Get Updated Customers [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.

[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on component "Get Updated Customers" (1) returned error code 0xC02020C4.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
 

Friday, April 13, 2012 - 2:04:24 PM - KRK Back To Top (16905)

Ray,

 

I checked everything and is configured as you specified.

 

WHen I execute the Stored Procedure in SSMS it returns the package ID,

 

On the results table the result name is 0 and the variable name is User::v_PackageLogID.

 

It appears that the variable User::v_PackageLogID Variable is not being set?

 

 

Friday, April 13, 2012 - 12:44:26 PM - Ray Barley Back To Top (16903)

The PackageID variable is set in the Init Package Log Execute SQL Task.  The stored proc that's called returns the value.  Pay close attention to how you configure the task.  On the General tab ResultSet is set to SingleRow.  On the Parameter Mapping tab a package variable is passed as a parameter to the stored proc.  On the Result Set tab the first column of the result set returned by the stored proc is assigned to the package variable User::v_PackageLogID

Friday, April 13, 2012 - 12:37:06 PM - KRK Back To Top (16902)

ok, my bad the task that calls EXEC etl.stp_InitExtractLog completed successfully.

However there seems to be an issue with the OLE DB Source. The parameter does not appear to be mapped.

When I click on Preview for Get Updated Customers I get an message box 'No value given for 1 or more required paramaters?

 

Friday, April 13, 2012 - 12:05:46 PM - KRK Back To Top (16901)

Thanks for the Link on Row Count Transformation. Actually I found this article earlier this morning.

It did not go into thjat much detail, for example, how does the  Input and Output Properties get defined?

 

I created all of the DB objects but the EXEC SQL Task that calls EXEC etl.stp_InitExtractLog ?,'Customer' fails.

The stored procedure has two paramters, one for PackageID and that variable has no value.

I do not see what the packageID Variable is being set?

So the Stored procedure fails because it can't insert a null value in the ExtractCount Column.

The second paramater is 'Customer'. I believe that it should be 'Sales.Customer'.

Thanks for replying. 

 

Friday, April 13, 2012 - 10:37:34 AM - Ray Barley Back To Top (16900)

You define a package variable (typically at the package level) then add a row count transformation in your data flow after a data source; i.e. you read data from somewhere then each row flows through the row count.  You give the row count your package variable and it populates it with the number of rows that you retrieved.

Here are the details: http://msdn.microsoft.com/en-us/library/ms141136.aspx

 

Friday, April 13, 2012 - 10:22:00 AM - KRK Back To Top (16899)

I created the DDL for the tables based on your ERD.

CREATE SCHEMA etl

GO

CREATE TABLE etl.PackageLog(
PackageLogID int Identity (1,1) NOT NULL,
PackageName VARCHAR(255) NOT NULL,
StartTime SmallDateTime NOT NULL,
EndTime SmallDateTime,
Success bit
CONSTRAINT PK_PackageLog
PRIMARY KEY (PackageLogID)
)
GO


CREATE TABLE etl.ExtractLog (
ExtractLogID int IDENTITY (1,1) NOT NULL,
PackageLogID int NOT NULL,
TableName VARCHAR(55) NOT NULL,
ExtractCount int NOT NULL,
StartTime SmallDateTime NOT NULL,
EndTime SmallDateTime,
Sucess bit
CONSTRAINT PK_Extract_Log
PRIMARY KEY (ExtractLogID),
CONSTRAINT FK_ExtractLog_PackageLog
FOREIGN KEY (PackageLogID)
REFERENCES etl.PackageLog (PackageLogID)
)
GO

CREATE TABLE etl.LoadLog (
LoadLogID int IDENTITY (1,1) NOT NULL,
PackageLogID int NOT NULL,
AS400TableName VARCHAR(20) NOT NULL,
SQLServerTableName VARCHAR(55) NOT NULL,
BeforeAS400Count INT NOT NULL,
BeforeSQLServerCount INT NOT NULL,
StartTime SmallDateTime NOT NULL,
EndTime SmallDateTime,
Success int,
CONSTRAINT FK_LoadLog_Package_Log
FOREIGN KEY (PackageLogID)
REFERENCES etl.PackageLog (PackageLogID),
CONSTRAINT PK_Load_Log
PRIMARY KEY (LoadLogID)
)
GO

Unfortunately I do not understand how to configure a RowCount Task.

 

Friday, April 13, 2012 - 8:32:27 AM - KRK Back To Top (16896)

I ran your create_db_objects.txt script and it is missing some tables. Please advise.

What file format is the CustomLogging.database?

I was hoping to get the correct version of AdventureWorks and MSSQLTIPS Database.

Thank you.

Msg 4902, Level 16, State 1, Line 1

Cannot find the object "etl.ExtractLog" because it does not exist or you do not have permissions.

Msg 4902, Level 16, State 1, Line 1

Cannot find the object "etl.ExtractLog" because it does not exist or you do not have permissions.

Msg 4902, Level 16, State 1, Line 2

Cannot find the object "etl.LoadLog" because it does not exist or you do not have permissions.

Msg 4902, Level 16, State 1, Line 1

Cannot find the object "etl.LoadLog" because it does not exist or you do not have permissions.

Thursday, April 12, 2012 - 7:00:59 PM - krk Back To Top (16888)

Thanks for the reply.

Before and after each load I must got a count from the source system and staging.

If they do not match I need to record the mismatch.

I did something like this in DTS in 2004 but I can't remeber exactly how I did it. 

I seem to remeber having an Execute SQL Task to output the counts as output parameters and save in a global variable and log the error in the next task.

I want to keep the table structures as generic as possible but I still pondering the design.

Thank again. 

 

Thursday, April 12, 2012 - 5:37:31 PM - Ray Barley Back To Top (16887)

The download (link is in the Next Steps section of the tip) has a text file with the T-SQL statements to create the database objects.  You can create a database called MSSQLTIPS and run the T-SQL commands in it.

As far as AdventureWorks this tip is pretty old so it was probably the version that came with SQL Server 2005.

I don't think any of the logging is dependent on having adventureworks; in other words you test the logging and not even have the Extract Customers data flow.  There is a package variable that gets set with the number of rows extracted but that's all that happens in the data flow as far as what affects the logging.

 

Thursday, April 12, 2012 - 5:08:12 PM - KRK Back To Top (16886)

Great article.

Which version of the AdventureWorks Database do I need and where can I get the MSSQLTIPS DB?

Thanks.

Monday, July 4, 2011 - 2:39:16 AM - Johanna Back To Top (14121)

Thanks a lot! The OUTPUT clause was very useful.

/Johanna

Friday, July 1, 2011 - 4:13:50 PM - Jeremy Kadlec Back To Top (14120)

Johanna,

Here is a tip on the OUTPUT clause - http://www.mssqltips.com/tip.asp?tip=1381.

Thank you,
Jeremy Kadlec

Friday, July 1, 2011 - 10:16:39 AM - Ray Barley Back To Top (14119)

Take a look at the OUTPUT clause: http://msdn.microsoft.com/en-us/library/ms177564.aspx

This allows you to "output" to another table when you're doing an insert, update or delete.  The above page shows a bunch of examples that output into a table variable but you can use a regular table as well.

This is essentially what you could do in a trigger; this just allows you to do it without having the trigger.

 

Friday, July 1, 2011 - 9:46:32 AM - Johanna Back To Top (14118)

This works fine, thanks for sharing! Does someone have an example of a stored procedure that will log the updated, inserted and deleted records in dimension and fact tables? I use slowly changing dimensions in SSIS 2008.

/Johanna

Wednesday, May 11, 2011 - 8:11:21 AM - Jason Yousef Back To Top (13798)

Great article, thanks for sharing the knowledge, we use the same, but we even log the updated, inserted, and unchanged counts, along with the extracted counts of course.

Tuesday, July 29, 2008 - 4:08:37 AM - Patricia Martinez Back To Top (1517)
Thanks a LOT for your tip!!! It has been very helpful to customize my log files, and it has given me ideas to update the log files in a structured way.

Patricia 

 














get free sql tips
agree to terms